Codes of practice
A code of practice provides detailed information on how you can achieve the standards required under the work health and safety (WHS) laws.
These do not replace the WHS laws, but codes of practice can be issued to help make understanding what you have to do a little easier.
An inspector can refer to a code of practice when issuing an improvement or prohibition notice.
Under the Work Health and Safety Act 2011, codes of practice are admissible in court proceedings.
Courts may regard a code of practice as evidence of what is known about a hazard, risk or control, and rely on it to determine what is 'reasonably practicable' in the circumstances to which the code relates.
It is recognised that equivalent or better ways of achieving the required work health and safety outcomes may be possible. For that reason compliance with codes of practice is not mandatory providing that any other method used provides an equivalent or higher standard of work health and safety than suggested by the code of practice.
Codes of practice
WHS codes of practice available are:
- Abrasive blasting
- Confined spaces
- Construction work
- Demolition work
- Excavation work
- First aid in the workplace
- Hazardous manual tasks
- How to manage and control asbestos in the workplace
- How to manage work health and safety risks
- How to safely remove asbestos
- Labelling of workplace hazardous chemicals (Exemptions apply. Please click here for details.)
- Managing electrical risks in the workplace
- Managing noise and preventing hearing loss at work
- Managing risks of hazardous chemicals in the workplace (Exemptions apply. Please click here for details.)
- Managing risks when new or inexperienced riders or handlers interact with horses in the workplace
- Managing the risk of falls at workplace
- Managing the risks of plant in the workplace
- Managing risks in stevedoring
- Managing the work environment and facilities
- Preparation of safety data sheets for hazardous chemicals (Exemptions apply. Please click here for details.)
- Preventing falls in housing construction
- Safe design of structures
- Spray painting and powder coating
- Welding processes
- Work health and safety consultation, coordination and cooperation
Pre-WHS legislation codes of practice
These codes of practice were developed based on older laws which were replaced with the Work Health and Safety Act and Regulation. However they are still current and can still be used to help you meet your WHS requirements.
We have also published an information guide on the safe management of synthetic mineral fibres (SMF) – glasswool and rockwool which is intended to complement SafeWork Australia’s guide to handling refractory ceramic fibres.